Removing Chlorophyll: Techniques For Pure Plant Extracts (2024)

Removing Chlorophyll: Techniques For Pure Plant Extracts (1)

Removing chlorophyll from plant extracts can be done using a variety of methods, including:

- Liquid-liquid or countercurrent separation (CCS) methods

- Solid-phase extraction (SPE)

- Centrifugal partition chromatography (CPC)

- Using charcoal

- Using hexane, ethyl acetate, methanol, or ethanol

CharacteristicsValues
MethodRemoving chlorophyll from plant extracts
------
UsingCentrifugal Partition Chromatography (CPC)

What You'll Learn

  • Using hexanes-EtOAc-MeOH-water (5:5:5:5, v/v) in elution-extrusion mode
  • Using charcoal
  • Using Diaion HP-2022–25
  • Using liquid-liquid or countercurrent separation (CCS) methods
  • Using a solvent system composed of hexanes, ethyl acetate, MeOH, and water (5/5/5/5, v/v)

Removing Chlorophyll: Techniques For Pure Plant Extracts (2)

Using hexanes-EtOAc-MeOH-water (5:5:5:5, v/v) in elution-extrusion mode

Firstly, the plant material is crushed to obtain a crushed natural product.

Secondly, the crushed natural product is immersed in a mixed solvent of alcohol and floral water and heated or set at room temperature.

Thirdly, the solution obtained is filtered and concentrated.

Fourthly, alcohol and a mixed solvent of a mixture of a foaming water and a solvent are added to the concentrate and the mixture is stirred.

Fifthly, the solution is centrifuged and the lower layer solution containing chlorophyll is removed.

Sixthly, alcohol and a mixed solvent of a mixture of a water and a water are added to the supernatant, concentrated and centrifuged to remove the supernatant containing the residual solvent.

Finally, the lower layer from which the chlorophyll has been removed is obtained.

This method can be used to produce a natural extract from which chlorophyll has been removed from a natural product without changing the structure and content of a useful component in the natural product.

Chiropractor Treatment for Plantar Fasciitis: Does It Work?

You may want to see also

Removing Chlorophyll: Techniques For Pure Plant Extracts (3)

Using charcoal

Activated charcoal is derived from natural sources such as coconut shells, peat, and wood. It has a porous structure, with a large pore diameter distribution, which makes it very effective at removing pigments like chlorophyll. However, this also means that it can remove active compounds from the extract, reducing the yield. Additionally, charcoal can break down over time and release ash that may contain heavy metals. These metals may contaminate the oil if they are not properly filtered out.

One alternative to activated charcoal is carbonX, an engineered product that is deposited onto a porous substrate. This product does not break apart, so it will not introduce ash or particles that are difficult to filter out. It is also pre-washed to prevent contamination.

Planting Sunflowers with a Tractor: A Step-by-Step Guide

You may want to see also

Removing Chlorophyll: Techniques For Pure Plant Extracts (4)

Using Diaion HP-2022–25

Diaion HP-2022–25 is a widely used stationary phase for removing chlorophyll from plant extracts. It is a type of solid-phase extraction (SPE) resin that can be used to selectively remove chlorophyll and other pigments from botanical extracts. Here is a step-by-step guide on how to use Diaion HP-2022–25 to remove chlorophyll from plant extracts:

Step 1: Prepare the Plant Extract

Before using Diaion HP-2022–25, you will need to prepare your plant extract. This typically involves grinding or homogenizing the plant material, such as leaves, in a suitable solvent. Common solvents used for chlorophyll extraction include acetone, ethanol, methanol, and hexane. It is important to choose a solvent that is compatible with Diaion HP-2022–25 and will not interfere with your desired compounds.

Step 2: Condition the Diaion HP-2022–25 Resin

The resin should be conditioned before use to remove any impurities and ensure optimal performance. This is typically done by washing the resin with a suitable solvent, such as distilled water or a dilute acid or base solution, followed by rinsing with distilled water. The resin should be allowed to swell fully before use.

Step 3: Load the Plant Extract onto the Diaion HP-2022–25 Column

The prepared plant extract is then loaded onto a column containing the conditioned Diaion HP-2022–25 resin. The extract should be passed through the column slowly to allow for maximum contact between the extract and the resin.

Step 4: Wash the Column

After loading the extract, the column is washed with a suitable solvent, such as distilled water or a dilute acid or base solution, to remove any remaining impurities and unbound compounds. This step helps ensure that only the desired compounds are retained on the column.

Step 5: Elute the Desired Compounds

Once the column has been washed, the desired compounds can be eluted using an appropriate solvent. The choice of elution solvent will depend on the properties of the compounds you are trying to isolate. Fractions are collected during the elution process, and the presence of the desired compounds can be confirmed using analytical techniques such as thin-layer chromatography (TLC) or high-performance liquid chromatography (HPLC).

Step 6: Regenerate the Diaion HP-2022–25 Resin

After elution, the Diaion HP-2022–25 resin can be regenerated by washing it with a suitable solvent, such as methanol or acetone, followed by rinsing with distilled water. This step helps remove any remaining compounds and prepares the resin for reuse.

Step 7: Analyze the Eluted Fractions

The eluted fractions containing the desired compounds can then be analyzed using various techniques, such as TLC, HPLC, or spectroscopy, to confirm the presence and purity of the compounds. This step may also involve further purification or concentration of the compounds, depending on the specific requirements of your experiment.

Plants' Absence: CO2 Levels Skyrocket, A World Without Plants

You may want to see also

Removing Chlorophyll: Techniques For Pure Plant Extracts (5)

Using liquid-liquid or countercurrent separation (CCS) methods

Liquid-liquid or countercurrent separation (CCS) methods have proven to be useful for the isolation of large quantities of target compounds from complex matrices. CCS methods are powerful tools in natural product research due to their relative ease of use, affordable cost, reduced environmental footprint, and performance characteristics.

CCS is a separation process founded on the principles of liquid-liquid extraction, where a chemical compound is distributed between two immiscible liquid phases according to its relative solubility in the two phases. CCS offers high sample loading, which compensates for moderate resolution. CCS is often used in combination with other separation methods, such as crystallization or column chromatography, to yield high-purity minor cannabinoids.

CCS technology can be found in the industry as either centrifugal partition chromatography (CPC) or countercurrent chromatography (CC). CPC is a hydrostatic instrumentation, while CC is a hydrodynamic instrumentation.

A solvent system of hexanes-EtOAc-MeOH-water (5:5:5:5, v/v) in elution-extrusion mode has been shown to be effective for the removal of chlorophyll from plant extracts. This solvent system was used with Centrifugal Partition Chromatography (CPC) to selectively and efficiently remove chlorophyll in a 45-minute process. The process was assessed using four different extracts prepared from three well-characterised plant materials: Epimedium sagittatum (leaves), Senna alexandrina (leaves), and Trifolium pratense (aerial parts). The method was found to adequately preserve the metabolomic diversity and integrity of the original extracts.

The CPC 1000 PRO, developed by Gilson, has been used to provide a rapid and reproducible method for the large-scale purification of cannabidiol (CBD) from the Cannabis sativa plant. CCS has been used to separate cannabinoids, with a focus on CBD, from the sticky resin found on the surface of the plant. CCS is particularly important to avoid contamination with THC, the main psychoactive chemical found in cannabis.

How to Split Ground Cover Plants for Propagation

You may want to see also

Removing Chlorophyll: Techniques For Pure Plant Extracts (6)

Using a solvent system composed of hexanes, ethyl acetate, MeOH, and water (5/5/5/5, v/v)

To remove chlorophyll from plant extract, you can use a solvent system composed of hexanes, ethyl acetate, MeOH, and water (5/5/5/5, v/v). This method is called Centrifugal Partition Chromatography (CPC) and is used to separate and purify substances. It is a type of countercurrent separation (CCS) method, which is useful for isolating target compounds from complex matrices.

  • Prepare the Solvent System: Mix hexanes, ethyl acetate, MeOH, and water in a 5:5:5:5 ratio (by volume). This will create two immiscible phases: an organic upper phase and an aqueous lower phase.
  • Dissolve the Plant Extract: Dissolve your plant extract in the solvent system, ensuring it is completely dissolved with no visible particles.
  • Separate the Phases: Allow the solution to settle, and then separate the upper and lower phases. The chlorophyll pigments will be concentrated in the organic upper phase.
  • Perform Liquid/Liquid Partitioning (Optional): If you want to further separate the chlorophyll, you can perform liquid/liquid partitioning. Divide the solution into two parts and collect equal volumes of the upper and lower phases in separate containers. The upper phase will be highly enriched in chlorophyll.
  • Countercurrent Separation (CCS): Load the CPC column with the organic upper phase as the stationary phase and the aqueous lower phase as the mobile phase. Run the CPC in descending mode at a flow rate of 25 mL/min and a rotation speed of 2500 rpm.
  • Collect the Fractions: During the elution stage, collect the fractions that are free from chlorophyll (chlorophyll knock-out extracts). During the subsequent extrusion stage, collect the fractions containing the chlorophyll pigments (chlorophyll-enriched fractions).
  • Analyze the Fractions: Use techniques such as HPTLC, UHPLC-UV, and 1H NMR spectroscopy to analyze the phytochemical composition of the fractions and confirm the removal of chlorophyll.
California's Six Plant Law: Per Person or Household?

You may want to see also

Frequently asked questions

Chlorophyll is a pigment that gives plants their green colour and is critical in photosynthesis, allowing plants to absorb natural light from the sun for energy.

Chlorophyll is highly soluble in ethanol, which is a popular solvent for cannabis extraction. This can result in a darker-coloured extract, which may be undesirable.

There are several methods to remove chlorophyll from a plant extract. One method is to use chilled ethanol (-20ºC to -70ºC) and shorten the extraction time. Another method is to use activated charcoal, which is made from coconut shells, peat, petroleum coke, bone char, olive pits, coal, or sawdust. A third method is to dissolve the ethanol extract in distilled water, add lab-grade hexane, and pour the mixture into a separation funnel. This will result in two layers: an upper hexane layer containing chlorophyll, and a bottom water layer. The process can be repeated until there is very little chlorophyll left in the aqueous layer.

Removing Chlorophyll: Techniques For Pure Plant Extracts (2024)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Carmelo Roob

Last Updated:

Views: 6232

Rating: 4.4 / 5 (45 voted)

Reviews: 92% of readers found this page helpful

Author information

Name: Carmelo Roob

Birthday: 1995-01-09

Address: Apt. 915 481 Sipes Cliff, New Gonzalobury, CO 80176

Phone: +6773780339780

Job: Sales Executive

Hobby: Gaming, Jogging, Rugby, Video gaming, Handball, Ice skating, Web surfing

Introduction: My name is Carmelo Roob, I am a modern, handsome, delightful, comfortable, attractive, vast, good person who loves writing and wants to share my knowledge and understanding with you.